Advantages of Switch POE Industrial

November 30 [Fri], 2018, 16:35
Advantages of Switch POE Industrial


1. Certainty
The MAC protocol of Ethernet, CSMA/CD, can make the network conflict,Simplistic Campus Network Solutions especially when the network load is too large. For an industrial network, if there is a large number of conflicts, then the data must be reissued many times so that the uncertainty of the internetwork communication will increase greatly. In industrial control networks, the uncertainty from one location to another will inevitably bring about a reduction in system control performance.

2. Real-time of Switch POE Industrial
In industrial control systems, real-time can be defined as the testability of the system's response time to an event. That is to say, after an event occurs, the system must reflect within a time range that can be accurately predicted. However, the real-time requirement of data transmission in industry is extremely high, and data updating is usually done in dozens of milliseconds.

3. Reliability
At the very beginning, Ethernet was not designed for the industrial network application. So when it is applied to the industrial field, in the face of bad conditions and serious interline interference, all these will inevitably reduce its reliability. In the production environment, the industrial network must have high reliability, recoverability, and maintainability, that is, to ensure that any component failure in a network system will not lead to the collapse and paralysis of applications, operating systems or even network systems.
コメントする
小文字 太字 斜体 下線 取り消し線 左寄せ 中央揃え 右寄せ テキストカラー 絵文字 プレビューON/OFF

不正な自動コメント投稿を防ぐため、チェックボックスにチェックをしてください。

利用規約に同意
 X 
禁止事項とご注意
※本名・メールアドレス・住所・電話番号など、個人が特定できる情報の入力は行わないでください。
「ヤプログ!利用規約 第9条 禁止事項」に該当するコメントは禁止します。
「ヤプログ!利用規約」に同意の上、コメントを送信してください。