Connect the two water provide hoses towards the H and C nozzles on the back of the washer, using pliers. Twist on the other end of each hose
Fix Washing Machine Problems
to the hot and cold water taps on the laundry room wallHow to Install a Washing Machine Tightly Against the Wall.
Plug in the washer electrical cord to the wall outlet.
Slide the washer toward the wall and pull up the two provide hoses
as well as the drain hose, so that all three hang over the top of the appliance.
Insert the drain hose as far as it will go into the drain pipe on the back wall, typically between the water taps.
Push the washer back toward the wall, taking care not to let the drain hose or water supply hoses fall behind the appliance where they could be crushed. There will be a slight gap where the hoses connect for the nozzles on the rear of the washer.
Twist the feet in the four bottom corners of the washer counterclcokwise until all are firmly on the floor. This helps balance the washer and prevent it from shaking during the spin cycleHow to Install a Washing Machine Tightly Against the Wall.
How To Install A Washing Machine Tightly Against The Wall
Related Articles:How To Remove A Washing Machine Tub