A mobile phone charger draws about 2 watts on charge

June 11 [Tue], 2013, 16:06
The performance and longevity of rechargeable batteries are to a large extent governed by the quality of the charger. In a price-competitive world, battery chargers are often given low priority, especially as consumer products. Choosing a quality charger is important considering the cost of battery replacement and the frustration poorly performing batteries create. The charger should serve as a quintessential master and guardian angel to protect the environment and save money by A1309 compatibleextending battery life.

There are two varieties of chargers: the personal chargers and the fleet chargers. For cell phones, laptops, tablets or digital cameras, manufacturers include personal chargers. These are made for one battery type, are economically priced and perform well when used for the application intended.

The fleet charger serves employees in a team environment and often has multiple bays. The original equipment manufacturer (OEM) sells the chargers and third parties also provide them. While the OEMs meet the basic requirements, third-party manufacturers often include special features, such as a discharge function for battery conditioning and calibration.
Some manufacturers of third-party chargers have become creative and offer advanced charge methods for lead- and nickel-based batteries. While pulse charging may be beneficial for nickel-based batteries, this method is not recommended for Li-ion. The voltage peaks are too high and cause havoc with the protection circuit. Battery manufacturers do not support alternative charging methods and say that pulse charging could shorten the life of Li-ion.

There are many valuable additional features for chargers, and hot- and cold-temperature protection is one. Below freezing, the charger lowers or prevents charge depending on the type of battery. When hot, the charger only engages when the battery temperature has normalized to a safe level. Advanced lead acid chargers offer temperature-controlled voltage thresholds, as well as adjustments to optimize charging for aging batteries.

Some chargers, including Cadex chargers, feature a wake-up feature or “boost” to allow charging Li-ion batteries that have fallen asleep. This can occur if a Li-ion battery is stored in a discharged condition and self-discharge has depressed the voltage to the cut-off point. Regular chargers read these batteries as unserviceable and the packs are discarded. The boost feature applies a small charge current to activate the protection circuit to 2.20–2.90V/ cell, at which point a normal charge commences. Caution should be applied not to boost lithium-based batteries back to life that have dwelled below 1.5V/cell for a week or longer.

There are two common charge methods, which are voltage limiting (VL) and current limiting (CL). Lead- and lithium-based chargers cap the voltage at a fixed threshold. When reaching the cut-off voltage, the battery begins to saturate and the current drops while receiving the remaining charge on its own timetable. Full charge detection occurs when the current drops to a designated level. Read more about Charging Lead Acid.

Nickel-based batteries, on the other hand, charge with a controlled current and the voltage is allowed to fluctuate freely. This can be compared to lifting a weight with an elastic band. The slight voltage drop after a steady rise indicates a fully charged battery. The voltage drop method works well in terminating the fast charge, however, the charger should include other safeguards to respond to anomalies such as shorted or mismatched cells. Most batteries and chargers also include temperature sensors to end the charge if the temperature exceeds a safe level. Read more about Charging Nickel-cadmium.

A temperature rise is normal, especially when nickel-based batteries move towards full-charge state. When in “ready” mode, the battery must cool down to room temperature. Heat causes stress and prolonged exposure to elevated temperature shortens battery life. If the temperature remains above ambient, the charger is not performing right and the battery should be removed when “ready” appears. Extended trickle charge also inflicts damage, and nickel-based batteries should not be left in the charger for more than a few days.

A lithium-based battery should not get warm in a charger and if this happens, the battery or charger might be faulty. Discontinue using the battery and/or charger. Li?ion chargers do not apply a trickle charge and disconnect the battery electrically when fully charged. If these packs are left in the charger for a few weeks, a recharge may occur when the open circuit voltage drops below a set threshold. It is not necessary to remove Li-ion from the charger when full; however, if not used for a A1245 compatible week or more, it is better to remove them and recharge before use.

A mobile phone charger draws about 2 watts on charge, while a laptop on charge takes close to 100 watts. The standby current must be low and Energy Star offers mobile phone chargers drawing 30mW or less five stars for high efficiency; 30–150mW earns four stars, 150–250mW three stars, and 250–350mW two stars. The industry average is 300mW on no-load consumption and this gets one star; higher than 500mW earns no stars. Low standby wattage is only possible with small chargers, such as the four billion mobile phone chargers that are mostly plugged in.

With recurring accidents while transporting lithium-based batteries by air

June 11 [Tue], 2013, 16:05
Reputable battery manufacturers do not supply lithium-ion cells to uncertified battery assemblers. This precaution is reasonable VGP-BPS20/S compatible when considering the danger of explosion and fire when charging and discharging a Li-ion pack beyond safe limits without an approved protection circuit.

Authorizing a battery pack for the commercial market and for air transport can cost $10,000 to $20,000. Such a high price is troubling when considering that obsolescence in the battery industry is common. Manufacturers often discontinue a cell in favor of higher capacities. The switch to the improved cell will require a new certification even though the dimensions of the new cell are the same as the previous model.

Cell manufacturers must comply with their own vigorous cell testing and we ask, “Why are additional tests required when using an approved cell?” The cell approvals cannot be transferred to the pack because the regulatory authorities do not recognize the safety confirmation of the naked cell. The finished battery must be tested separately to assure correct assembly and is registered as a standalone product. Read about Safety Concerns with Li-ion.

As part of the test, the finished battery must undergo electrical and mechanical assessment to meet the Recommendations on the Transport of Dangerous Goods on lithium-ion batteries for air shipment, rules set by the United Nations (UN). The electrical test stresses the battery by applying high heat, followed by a forced charge, abnormal discharge and an electrical short. During the mechanical test, the battery is crush-tested and exposed to high impact, shock and vibration. The UN Transport test also requires altitude, thermal stability, vibration, shock, short circuit and overcharge checks. The UN Transport works in conjunction with the Federal Aviation Administration(FAA), the US Department of Transport (US DOT) and the International Air Transport Association (IATA).*

The authorized laboratory performing the tests needs 24 battery samples consisting of 12 new packs and 12 specimens that have been cycled for 50 times. IATA wants to assure that the batteries in question are airworthy and have field integrity. Cycling them for 50 times before the test satisfies this requirement.

The high certification costs make many small manufacturers shy away from using Li-ion for low-volume products; they choose nickel-based systems instead. While strict control is justified, an uncertified Li-ion kept in the hands of the expert and out of aircraft would be acceptable, but controlling such movement VGP-BPS20A compatiblein the public domain is next to impossible. This makes it hard for the hobbyist who wants to win a race with a high-powered Li-ion battery but is bogged down by many rules.

With recurring accidents while transporting lithium-based batteries by air, regulatory authorities will likely tighten the shipping requirements further. However, anything made too cumbersome and difficult will entice some battery manufacturers to trick the system, defeating the very purpose of protecting the traveling public. Read about How to Transport Batteries.

Ease of use is one reason for Apple's iPad is highly popular

August 20 [Mon], 2012, 11:04
Apple's iPad is highly popular for a number of reasons. One of those reasons is the ease of use. Unfortunately, because it is so easy to use, there is no instruction manual provided with the device. There seems to be a lack of ipad help out there. This causes many of the truly powerful iPad features to be virtually unknown, and unused. Most iPad owners end up only using the most basic features available .

For example,using a iPad Charger for it,the basic features iPad 2 users regularly use include listening to music, watching video, surfing the web, and sending and receiving email. They seldom dig deeper to find the apps, or applications, that can increase their productivity, sync data with their PC or iPhone, or send notifications.


What are the other powerful iPad features that you are missing out on? The ability to talk with others with a webcam is old news, but did you know that with the iPad, you can also record video and audio? You could turn your iPad into a virtual recording studio if you choose to do so. There are more than 65,000 applications that you can use with your iPad to make it sit up and sing. You can even get apps that will allow you to learn how to play the piano - directly on the screen.

Additionally, the features iPad 2 include, which were not available with the original iPad is a dual webcam. This means that the webcam works from the front of the system and the back of the system, so you don't have to turn the screen to use the webcam.

Another fantastic and powerful iPad feature is the HDMI output. This lets users mirror their video onto their television screen. You can also use the Ambient Light Sensor, which adjusts the lighting on the screen, based on the lighting in the room you happen to be in automatically, making what is on the screen easier to view.

The iPad was designed to be used on the go, so it stands to reason that the iPad features would include a digital compass. This is a feature that many people do not even realize that they have. It also has assisted GPS built right in.

You do not have to be holding your iPad in front of you to use it. You can actually use the Voice Over Screen Reader to read webpages out loud to you while you do other things. You can even use this iPad feature to set up gesture control. This allows you to tap the screen in a way that you choose to open specific applications or programs whenever you like, with a screen gesture that you choose. Ipad help is often hard to find but there is pretty much an application for anything and everything so just google what you're after and you will most likely stumble across it.

The Apple iPad features are excellent for students or those who work in any type of industry where research is important. You can simply highlight any text in eBooks or on a webpage and bookmark it, track it, or even add your own notes to the information.

When you look at all of the iPad features that exist when you take your new device out of the box, and then you add apps that make your life simpler, the iPad really does become a powerhouse device like nothing you have ever seen before. By the time that you discover all of the possibilities, you will wonder how you ever got along without your iPad. So go out and get some ipad help and discover what your device is trully capable of!

Have you ever think about to buy a Android Phone?

August 20 [Mon], 2012, 11:02
How do you make a decision on the best phone for you? With such a huge variety of cell phones to choose from it is really hard to make a decision. The Google phones have recently become incredibly popular, thanks to Google's Android operating system. Several cell phone producers are incorporating the Android operating system into their cell phones. Here are some of the top Android phones on the market today.These days, most people have a cell phone. Even people who swore that they would never ever find a cell phone useful have acquiesced to the convenience of mobile phones and technology. What other way would you explain the trend of the pay as you go cell phone? One of the most popular cell phones models available on the market(cell phone and android 4.0 tablet)is Google's Android phone.


By having smart phone technology, its competition has a lot to contend with. With such a huge selection of Android Phones, how do you know which phones are the leading Android Phones? Here are some of the phones that got the best reviews.What are your wants from your cell phone? When it comes time to upgrade their cell phone this is something every purchaser should ask him or herself. Making phone calls was the original purpose of a cell phone. As the cell phone revolved, people began wanting to take pictures, send text messages, listen to their music and access the Internet. You can do all that and some by choosing a smart phone. Playing games, checking the weather report and making phone calls are only a few of the countless things you will be able to do on this phone. Before choosing one of the top Android phones, you should consider what you want the phone to be able to do for you. Here are some of the top Android phones available right now.

Among the top Android phones is the Acer BeTouch E110. This is only one of the Acer BeTouch phones out on the market. The E110 is a smart phone running with the Android 1.5 software set. It is not the latest edition from Acer's technology, but the BeTouch E110 is capable of almost everything the other smart phones are. Acer has their own interface that assists users in operating their phones. This phone has a little touch screen that is powered by a 416 MHz processor. The touch screen is less than three inches in size! The touch screen is not even three inches large!The Motorola Quench is one of the top Android phones. The Quench, a later model of Motorola has been enhanced with the Android operating system. This phone is one of eight Motorola models that uses the Android system. The phone has a screen that is only slightly larger than three inches, however the screen has high definition (320 x 480). This phone uses Motoblur technology, which will allow social networking users a better experience. It uses the Android 1.5 operating system and offers Wi-Fi capability, GPS, a camera that is five megapixels and several apps the user will absolutely adore.The Sony Ericsson Xperia X10 Mini is one of the most highly respected Android phones on the market. This phone is built on a slightly different model with no name change. The mini is basically the more compact version of the phone that it is modeled after. This phone works with Google's Android 1.6 operating system and is paired with the UX interface by Ericsson.

The touch screen is only two and a half inches large and the phone doesn't even weigh 100 grams. Even though it is small, it packs quite a punch. The phones comes with a camera that is five megapixels, along with a 3.5mm headphone jack that makes it possible to listen to music already on your phone.The HTC Legend is very popular. Its rating on the website Know Your Mobile dot com was number one. The HTC Legend is not the first Android phone but is rather high in demand. This might have to do with the conjunction between the HTC user interface and the Android 2.1 operating system. The screen is a touch screen and is a hair larger than three inches in size. One of its most popular features is the control it offers. It is likened to a track pad or joystick style of control. Also, it has Wi-Fi capability and GPS.

On the market today, the LG InTouch Max GW620 is among the top rated Android phones. Many consumers who purchase this phone tell everyone they know. They insist that the phone is almost perfect. It features a great five megapixel digital camera and purchasers rave about how simple the interface is to use. You can talk for eight hours before you need to start thinking about the battery. This is the phone for someone who enjoys making phone calls and is appreciative of being able to access things are only available on smart phones. Our only complaint is the cost. It is fairly expensive. One Motorola phone that functions with the Android operating system is the Motorola Cliq. This phone is for sale thought T-Mobile. It has a keyboard that slides out. One of the things that makes this phone so popular is that it allows the user to keep long logs of e-mails, text messages and social networking updates. You can utilize this phone for keeping your Twitter and Facebook pages up-to-date. You are able to remotely access the data on the phone.

An Android phone that is very popular is the T-Mobile Pulse Mini. This phone is designed for the money conscious consumer who wants all the bells and whistles of an Android phone but does not want to pay an astronomical price. The size of the touch screen on this phone is less than three inches. It comes with a 3.2 megapixel camera that has an LED Flash that helps the photographer snap even better photos. The phone runs Android 2.1 software. The difference between this is and the regular Pulse phone is it had a jack for a headphone.

HDMI technology is finding its way into mainstream consumer audio/video products

August 20 [Mon], 2012, 10:58

When a new technology comes to market, it is typically first found in the more expensive segments of a given product category. When GM™ introduced airbags in the mid-1970's, Cadillac was chosen to be the first car to provide this option, offering both driver and passenger airbags. Then the trickle down process begins. As the new technology becomes proven and other market factors take hold such as swelling market demand and economies of scale, it begins to trickle down into mainstream products. Today even the least expensive cars offer dual airbags as standard equipment. The same phenomenon is taking place with the High-Definition Multimedia Interface (HDMI Cables) connectivity standard. Previously found only in high-end audio/video devices, HDMI technology is finding its way into mainstream consumer audio/video products. As HDMI takes hold, more and more products are surfacing in support of HDMI and the needs of the surging residential and commercial audio/video market.


The HDMI connectivity standard combines both uncompressed digital audio and video into a single compact interface and supports bandwidth speeds of up to 4.95-Gbps. Instead of using separate and often bulky cables for analog audio and video transmission, with HDMI only a single cable is needed for a high-resolution, all digital signal transmission. HDMI is an outstanding connectivity solution and it's no wonder its popularity is spreading; however HDMI technology isn't without its challenges. HDMI cables are known for having a length limitation of about 5 meters. Copper cables longer than 5 meters in length often just don't work. The cable's impedance (resistance to sending the signal) increases as the cable length increases. At about 5 meters, the resistance is too high to pass the signal. Unlike analog video transmission that can display varying degrees of picture quality, HDMI digital video transmission either works or it doesn't, it will display a picture or it won't. This HDMI signal loss phenomenon can be described as "falling off a cliff" meaning there is no middle ground. This isn't completely true, since an inferior HDMI cable can introduce some digital artifacts into the picture, but as a general rule this is a good description of HDMI signal loss.

A 5-meter HDMI cable limitation is a serious problem since many audio/video applications require its cabling to reach beyond 5 meters. Some products have come to market, such as fiber optic cables, allowing for long HDMI cable runs beyond 5 meters. Traditional HDMI cables transmit a digital signal over copper conductors were fiber optic cables use light pulses to send the audio/video signal over clear plastic or glass fiber conductors. Since it has little or no impedance, fiber optic technology allows for a very long cable runs. The biggest barrier to fiber optic cabling is its price. Often running into the four-figure price range, this solution isn't economically viable for many audio/video applications. Another option is to use an HDMI extender, also known as a booster box, to achieve a long cable run. An HDMI cable runs from the video source (i.e. DVD player) to the extender. A second HDMI cable of similar length is plugged into the extender and then is connected to the display. The HDMI extender amplifies the incoming signal before resending it over the second length of HDMI cable effectively doubling the length of the cable run. This is a good solution if the cable is not going to be run in-wall. A survey of HDMI amplifiers was unable to identify any that are Underwriters Laboratories (UL) listed for in-wall installation. Fire safety is an important consideration when running cables in-wall. Since long run HDMI cables are typically installed in-wall, an HDMI extender may not be the best solution for certain long run applications.

The solid-state lighting core technology and product development has been neglected

June 20 [Wed], 2012, 18:43
U.S. Department of Energy announced funding of $ 7.1 million as part of the latest solid-state lighting production R & D project funding, but Congress budget cuts have affected the professional dslr camera grip new core technology research and product development projects funded.

U.S. Energy Bureau said it has selected the object of three solid-state lighting (SSL) produced as three solid-state lighting R & D funded. The project lasted two years, primarily focused on a significant reduction in production costs, improve product quality by improving the production equipment, improve the processing and monitoring technologies.

U.S. Bureau of Energy, the total amount of funds allocated to these three projects is $ 7.1 million to the separation of 5 million U.S. dollars to get the project to three private companies. In Durham, North Carolina-based Cree has won a project, the project aims to optimize the LED device can be integrated with the architectural and outdoor applications, saving raw materials. The project aims to reduce the overall cost of production under the premise of maintaining the performance of lighting products.

Another fund of funds winner is headquartered in California Milpitas KLATencor companies, high-precision thermal tests used in the production of the LED process through the development of tools to improve the color consistency of LED. Last funding that funding recipients are k the-SpaceAssociates company is located in Dexter, Michigan, on the basis of the existing optical detection mode, the organic LED (OLED) layer of high-precision measurement. The measurement of layer thickness and composition tool is designed to monitor conversion efficiency, color and life to the OLED production.

This is the third round of investment of the U.S. Bureau of Energy Solid State Lighting production projects, aims to create employment and stimulate exports and to enhance the status of the United States a global leader in energy efficiency. For more information, visit the U.S. Department of Energy project selection page.

The solid-state lighting core technology and product development has been neglected

U.S. Department of Energy said in a statement of its funded projects due to limited fund-raising of the 2012 fiscal year, the United States Energy Board will not select or fund any project related to the development of solid-state lighting core technology or solid state lighting products. Although the United States Energy Board has received numerous quality of proposals on these items, the 2012 fiscal year of solid-state lighting project funds by the Congress decision-making, decision-making in Congress focused on the production and development. Congress also directs the U.S. Department of Energy funding of the 2012 fiscal year full funding for the newly published New Year's Eve project, which further affected the 2012 notebook TS-L633 DL DVD+RW CD+RW Drive fiscal year projects selected number.

Most foreign customers tend to choose the full outsourcing of IT services

June 20 [Wed], 2012, 18:41
Great efforts to develop integrated management services in China, 2011 to early 2012, the "3 +3" strategy, and then May 31, 2012 China's first integrated management and service center in Suzhou National Science Data Center, IBM Global Information The next-generation IT services model of development advocated by the Department of Technology Services has been landing in China is moving forward steadily, and in accordance with established plans.

Integrated management services is not a new concept, IBM in overseas markets to promote this service has a long history, and achieved fruitful results. In the field of outsourcing external blu ray dvd burner services, IBM globalization operations, and has an extensive global delivery network. According to the integration of IBM Greater China vice president, Global Technology Services general manager of Technology Division Ju Li Description: "At present, IBM in the world with over 50 delivery centers and over 10,000 employees. IBM manages more than 480 customers around the world data center and IBM's own data center, and 2.5 million desktop terminals and 500,000 non-IBM equipment.

In foreign countries, outsourcing services is already a very mature market. Most foreign customers tend to choose the full outsourcing of IT services. Ju Li analysis said: "The foreign customers are focused primarily on the service provider can provide service level agreements (SLAs) to meet their business needs, ability to achieve the flexibility of IT management, but also to reduce IT management costs, so most of the foreign customers will choose to fully outsourced services. Chinese customers are different, they are very focused on building their own IT systems and IT teams. for Chinese customers to select and service providers build a condominium model is a matter of course. " IBM's integrated management services just meet such needs of Chinese customers, to provide a flexible service mode selection, and both can help users to host their data center, can also provide far Cheng Yunwei service or other pay-as-service needs of the user's .

From the course of the development of service management point of view first, users are accustomed to building data centers, and to assume all operation and maintenance and management responsibilities. This mode of management services are suitable for those with adequate funding and a large IT team, they can since the tube through the self control of the data center firmly in their own hands. With the rapid development of the enterprise's own business, and technology innovation, this self-built tube model is not conducive to business more energy and money into their main business, a huge IT cost center has the weight of some enterprises out of breath. IT management outsourcing is the inevitable result of the enterprise severely asset type to asset-light type transition. Therefore, enterprises and service providers to build a condominium model is becoming increasingly popular. For example, in the important IT system management and operation and maintenance, enterprise and service provider collaboration, and general IT system routine maintenance work can all be referred to the service provider. This hybrid build condominium management services model allows users to have greater choice and flexibility in IT management services. This build condominium model is also IBM's integrated management services advocated by the most close to the actual needs of Chinese users of the service mode.

Looking for services to manage the future development trend, the cloud service model will be popular. IBM in this regard has already done adequate preparation, and has many successful practice. Cloud computing has become a four core development plan is one of the IBM 2015 roadmap. IBM expects cloud computing revenue will reach 7 billion U.S. dollars in 2015. At present, 50 percent of the global Fortune 50 enterprises have adopted IBM's private cloud. Two years ago, IBM began offering public cloud services for enterprise customers. Today, there are 1 million enterprise customers running on IBM's cloud platform, the year of the transaction amount of more than 100 billion U.S. dollars. "In the public cloud, IBM 7 7 inchandroid tablet cloud delivery centers around the world, and delivery centers in the United States is responsible for centralized management." Ju Li said, "that IBM intends to provide public cloud services in China, and plans to establish in China a or more of the local cloud delivery centers in the process of public cloud services, IBM certainly will follow the global harmonization of policies and principles, and will strictly abide by relevant laws and regulations in China, whether it is to provide integrated management services, or public cloud services China's telecom operators will be good partners by IBM. "

With the increasing pressure of global economic growth, the market environment has become increasingly complex, the traditional pattern of growth has been difficult to work. New technology and applications, including cloud computing, business analysis and optimization, mobile Internet and e-commerce provides new opportunities for the development of enterprises, and has become an important driving force to drive enterprises to achieve smart growth.

Lenovo smartphone sales beyond the industry as a whole increased by 10 times

June 20 [Wed], 2012, 18:40
June 18 news, Lenovo Mobile Internet and Digital Home Business Group (MIDH) has released its first 5.0-inch screen smart phone - Lenovo S880 Music Phone The phone is priced at rw dvd drive 2199 yuan, the predetermined price of 1999 yuan.this means that Lenovo officially entered the mainstream market of 2000 yuan and other popular mobile phones to fight.

Lenovo S880 The release of the brand's first 5-inch WVGA resolution screen, internal with MTK MT6575 1GHz processor with 512MB of memory. The back of the Lenovo S880 is a 5 million pixel camera, the front is equipped with 30 million pixels, vice camera. Appearance and position of this Lenovo S880 Samsung GALAXY Note, however, Lenovo S880 is the dual card dual standby design, support of W + G network.

Vice president of Lenovo Group, China the CMO Wei Jiang, Ray said, Lenovo smartphone brand building and product marketing has always been tightly integrated with the majority of consumers. We will be defined in 2012 for the brand year, to do sports marketing, entertainment marketing, cross marketing, the aim is to expand rapidly in the market at the same time, the brand influence to a new level in a wider range of user groups have a profound identity and emotional resonance.

Recently, Lenovo has launched an intensive marketing campaign of the music phone, had also launched the marathon for Lok Fengpao application, music Fengpao a running class applications, compared to the Walk, tools, pedometer and other more popular sports applications music Fengpao biggest feature is the inclusion of social function, the user through microblogging after landing, you can see around the same music Fengpao runner, click the runners head to instant communication, the user if the distance between closer with about run.

According to the association annual report, Lenovo smartphone sales beyond the external dvd drive industry as a whole increased by 10 times, market share year over year increase of 8.2 percentage points, to achieve near double-digit market share and become China's fourth largest smartphone vendor. Functional mobile phones, feature phones in China's Lenovo sales volume year over year increase of 4.5%.

more than half of users said they at least once a week for shopping on the Tablet PC

June 20 [Wed], 2012, 18:37
June 18 message, according to the the eMarketer latest forecast by the 2012 Tablet PC users, the end of 2012, more than 20 percent of U.S. users, nearly 70 million Americans will be using the Tablet PC, within three years, there will behalf of U.S. users have a Tablet PC DVD-R/RW Drive CD TS-L632. Currently, 12% of users every day shopping in the Tablet PC.

eMarketer predicts that in 2012 the number of Tablet PC users will continue in 2011-digit growth, the growth rate will reach 106.5%, high growth rate is mainly affected by the popular iPad and the Kindle Fire, as well as to promote the listing of a large number of low-priced Tablet PC . eMarketer estimates that over 20% of U.S. users, nearly 70 million Americans will use at the end of the Tablet PC, within three years, there will be half of U.S. users have a Tablet PC.

eMarketer quoted the Zmags the data show that, in the growing flat panel users, more than half of users said they at least once a week for shopping on the Tablet PC,

eMarketer believes that the features of the Tablet PC allows users to close from the body, to the contrary, the Tablet PC to provide users with personalized or intimate shopping environment, which can deepen the users what they see on an emotional level contact Tablet SATA DVD+RW CD RW Multi Drive DL TS-L633 PC strategy, it is unwise to ignore the growing flat-panel computer retailers.

ITC has now confirmed AUO panel display does not violate any effective patent rights

June 20 [Wed], 2012, 18:35
June 17 message, according to foreign media reports, consumer electronics manufacturers in Taiwan AU Optronics pleased to announce that the U.S. International Trade Commission (ITC), United States Eastern time June 15 has been the agency administrative law judge on January 12, 2012the initial judgment given recognition, AU Optronics and did not infringe the patents of Thomson Licensing panel.

Thomson Licensing for French television maker Thomson Group's patent licensing company in the United States, the company frequently contact to other LCD manufacturers and patent license advocates Laptop UJ-850 DVD+RW DL Burner . In 2010, the patent licensing company AUO and several other manufacturers reported to the ITC, claiming that the accused products infringe the patent, and requested that the ITC to ban the infringing products into the U.S. market. After several weeks of trial, the AU Optronics charge of the case before the administrative judge did not violate the United States, "Section 337 (Section 337), to support the AU Optronics. U.S. 337, to prohibit all acts of unfair competition or export products to the United States in any unfair trade practices.

ITC has now confirmed AUO panel display does not violate any effective patent rights advocated by Thomson Licensing.
P R
カテゴリアーカイブ
http://yaplog.jp/soherearenews/index1_0.rdf