Sony decoding battery installation manual

August 28 [Sun], 2011, 22:32
1.Some instructions users must know:

1.1 For VGP-BPS8/VGP-BPL8,/VGP-BPS9/VGP-BPL9,VGP-BPS10/VGP-BPL10,VGP-BPS11/VGP-BPL11/VGP-BPX11 battery drivers,they all can be installed in all xp/vista/windows7 32 bits operating system laptops; for bps12 till follow-up models battery drivers,such as bps13 bps14. they all can be installed in all vista/windows7 32 bits and 64 bits operating system laptops.

1.2 Please make sure that the antivirus software and firewall are all closed before the driver installation.

1.3 If you are using windows xp system, just run the software as instructed as 2.1 or 2.2 pictures show ,step by step; if you are using vista or windows 7 system,it is required that the drivers installation must be proceed in "Adminstrator" user. Please click here for how to enter "Adminstrator"user.

1.4 It may take 3- 40 mins to install ,depending on your own laptop configurations,so it must not be cut off power ,removed battery neither shut off the laptop by force.Otherwise, it may damage your laptop.




1.5 For the models which are already confirmed to be compatiable with ,please click:

BPS8/BPL8 fit models;BPS9/bos10/BPL9/bpL10 fit models;BPS11/BPL11/BPX11 fit models;BPS12/BPL12 fit models;BPS13/BPL13 fit models;BPS14/BPL14 fit models;BPS15/BPL15/BPS17/BPL17 fit models;BPS18/BPL18 fit models;BPS21/BPL21 fit models; BPS22/BPL22 fit models;….(We are continuing updating)

2.The detailed installation way of the driver

2.1 Close your laptop ,insert the good working as well capacity above 2% original battery (Important notice:If the original battery below 2% capacity or if without original battery,please reference the 2.3 way installation) ,boot your laptop ,copy the sonysetup.exe file to your laptop in CD,install it as following picture show

Step One, Double_click "sonysetup.exe"the driver soft will run automatically,the installing windows will pop-up,choose "Accept Agreement" as below

installone.jpg

Step Two:When Choose the "Accept Agreement", it has been defaulted in "File Mode". Simply click "Update" to begin. The upgrade process will automatically back up the original BIOS. The laptop will reboot automatically after the BIOS update is completed.

installtwo.jpg

Step three :Once the laptop has rebooted, replace the Sony battery with your new intelligent battery. And then fully charge the battery before use.

Note:" File Mode" is the safe mode, it will automatically back up the original BIOS file before update,higher security level,recommended to users for update.

"Patch Model"will update BIOS patch files.The security level is inferior to"File model".

2.2 If you succeed in installing with the ways mentioned above ,but the battery light is flicking ,please turn off your laptop and insert your battery again, boot your laptop ,then it can work fine.

2.3

2.3.1 If you only have new oem battery above 2% capacity ,without any original battery , please only connect the adaptor with your laptop without any battey,run the program directly ,then will come up with a error message which shows no battery. If so ,please close your software installationm,insert your oem battery ,run the software again as 2.1 picture shows.Finally,you can succeed.

2.3.2 Please charge the orginal battery capatity till 2% first if less ,then run the software.
プロフィール
  • プロフィール画像
  • アイコン画像 ニックネーム:brandnewbattery
読者になる
2011年08月
« 前の月  |  次の月 »
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
最新コメント
Yapme!一覧
読者になる
P R
カテゴリアーカイブ
http://yaplog.jp/diggtwitter/index1_0.rdf